Xerox PE120i 1, 2, 3, 4

Page 2-4 Xerox WorkCentre PE120i System Administration Guide
Basic Network Installation
Enabling or Disabling TCP/IP
At the WorkCentre PE120i, perform these steps:
1¾Press [Menu] until you see
Network Setup on the top line of
the display. 8. Network Setup
[Reset Network]
2¾Press or until Conf igure
Network is displayed and press
[Enter]. 8. Network Setup
[Config. Network]
3¾Press or until TCP/IP is
displayed and press [Enter].
Config Network
[TCP/IP]
4¾Press or until Setup is
displayed and press [Enter].
¾To enable TCP/IP, press or
until Enable is displayed and
press [Enter]. Otherwise display
Disable and press [Enter].
TCP/IP
[Setup]