Xerox PE120i manual Test Print, ¾ Enable the Service Advertising Protocol SAP

6	¾ Enter the [NDS Tree] and [NDS Context] if using NDS.
7	¾ Enable the [Service Advertising Protocol (SAP)].
8	¾ Enter the [Primary File Server] name, if using Bindery.
9	¾ Click the [Apply] button to implement any changes.
	NOTE: Click the [Undo] button to cancel any changes made and return to the
	previous values.
10
	¾ Select the [Status] tab and then select [Reset Network Controller] to enable the
	selections to take effect.
11	¾ Continue with Test Print.
	Test Print
	To ensure the device has been installed on the network correctly a test print should be
	submitted from a client workstation. Perform the following steps:
1	¾ Open a document on a client workstation.
2	¾ Select the device as the printer to which the selected document will be sent.
3	¾ Print the document on the device and verify that it prints correctly.
4	¾ Ensure the driver is installed on every workstation that will be sending jobs to the device.
5	¾ Repeat the test for all workstations that will be sending jobs to the device.
6	¾ The installation process is now complete.

Network Installation Using Internet Services

Xerox WorkCentre PE120i System Administration Guide Page 6-13