Xerox WorkCentre PE120i System Administration Guide Page 4-11
Print Driver Installation for Networked Printers
Windows XP (Internet Printing Protocol)

NOTE: Windows XP supports printing via IPP as standard when TCP/IP is ins talled

on a Windows XP Workstation.

Use the Add Printer Wizard to add the WorkCentre PE120i to the network.
¾Select [Start], select [Settings], and then select [Printers and Faxes].
Double-click on the [Add Printer] icon to display the Add Printer Wizard.
¾Verify that the [Network Printer] is selected and click [Next].
The [Locate Your Printer] screen will be displayed.
¾Select [Connect to a printer on the Internet or on a home or office network].
The [Specify a Printer] screen will be displayed.
In the [URL] field enter the IP address or hostname of the printer in the following format:
http://aaa.bbb.ccc.ddd” or “http://printer-host-name”, where “aaa.bbb.ccc.ddd” is the IP
address of the WorkCentre PE120i and “printer-host-name” is the host name of the
WorkCentre PE120i registered with a DNS server.
The Add Printer Wizard will then ask if you wish to install a local driver for this printer. You
should click [OK] to install the driver.
¾Insert the CD ROM with the WorkCentre PE120i drivers into the workstation and select
[Have Disk].
Browse to the required Windows XP driver on the CDROM and select [OK].

NOTE: The driver will be found in the Drivers>Print folder on the CD in th e

appropriate PCL or PostScript (PS) folder. For PostScript, you will need to c hoose

the required language. The driver is identified by the file exten sion .inf.

Select [Next], and select [Next] again and the WorkCentre PE120i driver will be loaded
onto the workstation.
A dialog box will be displayed with a message regarding the printing of a test page.
Select [Finish] to accept the Yes choice.
¾Continue with Test Print on page 4-14.
1
2
3
4
5