| NOTE: Click the [Undo] button to cancel any changes made and return to the | Services | |
| previous values. | ||
|
|
| |
|
|
| |
7 | ¾ Select the [Status] tab and then select [Reset Network Controller] to enable the | Internet | |
| selections to take effect. | ||
8 | ¾ Using the procedure located in the Xerox CentreWare documentation, install the driver for | Using | |
| the workstation. | ||
| Installation | ||
9 | ¾ Continue with Test Print. | ||
| Test Print | Network | |
| To ensure the device has been installed on the network correctly a test print should be | ||
| submitted from a client workstation. Perform the following steps: | ||
1 | ¾ Open a document on a client workstation. |
| |
2 | ¾ Select the device as the printer to which the selected document will be sent. |
| |
3 | ¾ Print the document on the device and verify that it prints correctly. |
| |
¾Ensure that the driver is installed on every workstation that will be sending jobs to the
4 device.
5 | ¾ | Repeat the test for all workstations that will be sending jobs to the device. |
6 | ¾ | The installation process is now complete. |
Xerox WorkCentre PE120i System Administration Guide | Page |
