Ethernet
Use these instructions to set the rated speed for Ethernet using CentreWare Internet Services: To complete the installation of the WorkCentre PE120i, perform these steps:
1 | ¾ Enable CentreWare Internet Services (see “Enabling Internet Services” on page |
¾At the CentreWare Internet Services Home Page for the WorkCentre PE120i, select the
2 | [Properties] tab. |
3 | ¾ Select the plus symbol [+] to the left of the Connectivity folder in the Properties frame, |
and then select the [+] symbol to the left of the Physical Connections folder. | |
4 | ¾ In the Properties frame, within the Physical Connections folder, select [Ethernet]. |
5 | ¾ Choose the appropriate [Rated Speed]. |
6 | ¾ Click the [Apply] button to implement any changes. |
| NOTE: Click the [Undo] button to cancel any changes made and return to the |
| previous values. |
|
|
Network Installation Using Internet Services
7 | ¾ Select the [Status] tab and then select [Reset Network Controller] to enable the |
selection to take effect. |
Xerox WorkCentre PE120i System Administration Guide | Page |
