Xerox PE120i manual ¾ Open a document on a client workstation

¾Select the [Status] tab and then select [Reset Network Controller] to enable the

6	selections to take effect.
7	¾ Continue with Test Print.

	Test Print
	To ensure the device has been installed on the network correctly a test print should be
	submitted from a client workstation. Perform the following steps:
1	¾ Open a document on a client workstation.
2	¾ Select the device as the printer to which the selected document will be sent.
3	¾ Print the document on the device and verify that it prints correctly.

¾Make sure that the driver is installed on every workstation that will be sending jobs to the

4 device.

5	¾	Repeat the test for all workstations that will be sending jobs to the device.
6	¾	The installation process is now complete.

Network Installation Using Internet Services

Xerox WorkCentre PE120i System Administration Guide Page 6-23