![](/images/new-backgrounds/1174136/174136163x1.webp)
Cleaning the Printer
Cleaning the Printer
This section includes:
■Cleaning the Outside of the Printer on page
■Cleaning the Density Sensor on page
See also:
User Safety on page
Cleaning the Outside of the Printer
To remove stains, clean the outside of the printer using a soft, damp, cloth moistened with a mild neutral detergent. Do not spray detergent directly onto the printer.
Warning: To prevent electric shock, turn the printer off and unplug the power cord from the electrical outlet before cleaning the printer.
Use only an approved toner vacuum to clean the printer. Do not lubricate the printer with oil.
Cleaning the Density Sensor
The printer displays a message when the density sensor needs cleaning. To clean the density sensor:
1.Push up the latch on the front of the printer to open Front Door A.
Phaser® 6300/6350 Color Laser Printer