Xerox Phaser 6300 manual Solving Print-Quality Problems, Lines, Smudges, or Streaks, Solutions

Solving Print-Quality Problems

Solving Print-Quality Problems

This section includes:

■Lines, Smudges, or Streaks on page 4-5

■Repeating Defects on page 4-6

■Colors Align Incorrectly on page 4-7

■Fusing Is Incomplete on page 4-7

■All Colors Are Too Light or Too Dark on page 4-8

■Poor Transparency Print Quality on page 4-9

■Grays Not Neutral on page 4-9

■Colors Vary Between Computers on page 4-10

■Color Settings Not Applied on page 4-10

■Colors Do Not Match on page 4-11

■Printed Colors Do Not Match Monitor Colors on page 4-11

■PANTONE Colors Do Not Match on page 4-12

■Print Area Is Not Centered on the Paper on page 4-12

Lines, Smudges, or Streaks

Problem

Black and/or colored areas appear on the page in all colors and/or in non-printed areas.

Solutions

■Verify that the paper you are using is the correct type for the printer and is properly loaded. For more information on supported paper types, print the Paper Tips page:

a.On the control panel, select Information, and then press the OK button.

b.Select Information Pages, and then press the OK button.

c.Select Paper Tips Page, and then press the OK button.

■Verify that the paper loaded in the tray matches the paper type selected on the control panel and in the computer’s printer driver.

Phaser® 6300/6350 Color Laser Printer

4-5