Configuration Examples
Creating a simple configuration
This section presents a simple configuration example in two ways:
■Annotated with steps (page 106 through page 109)
■Sample output as it displays after executing all of the commands (page 109)
Creating the storage system
■Select the manager with the SELECT MANAGER command.
■View the systems available on the manager (Uninitialized Storage System1, if this is an uninitialized storage system) with the SHOW SYSTEM command.
■Select the targeted cell for creation by issuing the command SELECT SYSTEM
Uninitialized Storage System1.
■Add (create) the storage system with the ADD SYSTEM command.
1.Start SSSU from anywhere on the same network as your management appliance.
The NoSystemSelected> prompt displays.
2.Enter the SELECT MANAGER command with the name of the manager and the logon information (a sample user name, password, and manager are used in the following example).
NoSystemSelected> SELECT MANAGER swma31k008 USERNAME=XXX
PASSWORD=XXX
NoSystemSelected>
Note: The password is set through the management appliance user interface.
3.At the prompt, enter the SHOW SYSTEM command to display all the available systems on this manager.
NoSystemSelected> SHOW SYSTEM
Systems available on this Manager:
Uninitialized Storage System1
NoSystemSelected>
The display includes systems that are available on this manager. In the example, the default for an uninitialized storage system is one system named Uninitialized Storage System1.
106 | Command View EVA Storage System Scripting Utility Reference Guide |
