XM Satellite Radio AA-RU5HC-TE manual

SSSU Command Reference

■HALT_ON_ERROR—This is similar to EXIT_ON_ERROR. Any error causes the scripting utility to halt but not exit until any key is pressed. Then the scripting utility exits with an error code. This allows you to see the error before the window closes on exit.

Note: When manually typing commands, HP does not recommend using the EXIT_ON_ERROR or HALT_ON_ERROR modes. You should avoid these modes because SSSU exits on any kind of error, including a typographical one.

RETRIES=

Number of minutes to attempt “long” period retries, such as when the command view EVA service is busy or restarting. Specify between 1–10 minutes (inclusive). The default is four minutes.

NORETRIES

Specify that you do not want the scripting utility to retry commands.

SAFE_DELETE

Specify if you want to delete all dependent or related objects before the specified object can be deleted. For example, if you specified a deletion of the VDisk that had LUNs presented, the DELETE VDISK command would be rejected with a message telling you that all the LUNs presented from this storage must be deleted before the storage can be deleted. This is the default.

You must always delete related objects if SAFE_DELETE is specified.

NOSAFE_DELETE

Allows the deletion of an object even if related objects are present. The behavior of the NOSAFE_DELETE command depends on the mode of operation (entering commands manually or running commands through a script) in which SSSU is running.

If you are entering commands at a terminal, the Are you sure? prompt displays and you must type Yes for the deletion to proceed. Note that you must type a capital Y followed by lowercase es for the deletion to proceed.

If the input is from a script (using the FILE command) or from the command line, the deletion proceeds without warning.

84 Command View EVA Storage System Scripting Utility Reference Guide