SSSU Command Reference
ADD HOST
Use the ADD HOST command to add a host and its World Wide Name (WWN) to the list of hosts that can connect to virtual disks within the current system.
The ADD HOST command adds the first Fibre Channel Adapter (FCA) only. The SET HOST command (see page 80) adds each subsequent FCA.
Syntax
ADD HOST <host_name> WORLD_WIDE_NAME=<world_wide_name>
Switches
The following switches are available with the ADD HOST command.
IP=
This is the network IP address. If the IP address is not specified, the name of the host will be specified as is (DNS).
COMMENT=
This is an optional switch that associates a
OPERATING_SYSTEM=
The type of operating system for the specified host. Choose one of the following operating systems (they are spelled here as SSSU expects):
■CUSTOM
The correct syntax is
OPERATING_SYSTEM=CUSTOM=<16 hex characters>
■HPUX
■IBMAIX
■OPEN_VMS
■SOLARIS
■TRU64
■UNKNOWN
Command View EVA Storage System Scripting Utility Reference Guide | 37 |
