Configuration Examples
Using the SHOW commands
This section provides examples of using the SHOW command, based on the storage system, host, and virtual disk created in the previous section, “Creating a simple configuration” on page 106. The purpose of this presentation is to provide a sample of SSSU output.
To view information about various system attributes, you first select the system and then use the SHOW commands.
SHOW SYSTEM
Use the SHOW SYSTEM command to view information about the selected system.
1. At the NoSystemSelected> prompt, enter SHOW SYSTEM.
NoSystemSelected> SHOW SYSTEM
Systems available on this Manager:
Yekao
Makawao
NoSystemSelected>
The available systems on this manager are displayed.
2. Select the system you want with the SELECT command.
NoSystemSelected>SELECT SYSTEM Yekao
3. Use the SHOW SYSTEM command to display information about the system.
Yekao> show system Yekao
Yekao information:
Initialized Enterprise System Properties:
| Name : | Yekao |
|
| Licenses : | BASIC SNAPSHOT DRM | |
Operational_State : | Initialized - Good | ||
Total_storage_space : | 947.78 | GB | |
Storage_space_used : | 194.51 | GB | |
Available_storage_space : | 753.26 | GB | |
Device_addition_policy : | Manual |
| |
Console_LUN_ID : | 0 |
| |
Controller_time : | |||
Node_world_wide_name : | |||
Comments : |
|
| |
ID : | 08000710b4080560bc49010000d0000000000200 | ||
ElementRefreshStatus : | 0,0,0,0,0,0,0,0,3,0,0,0 | ||
110 | Command View EVA Storage System Scripting Utility Reference Guide |
