SSSU Command Reference
Command introduction
Most of the commands have switches that you can also use. These are described under the entry for the command in this chapter.
You can display a list of switches for each command directly within the interface by entering a ? after the command or option name. For example, ADD ? displays all of the switches available with the ADD command, and ADD SYSTEM ? displays the switches available for the ADD SYSTEM command (see “Getting help” on page 12).
Remember when you issue commands:
■Use the full path to qualify specified names.
■If a path name contains a space, enclose the entire name in double quotes (“”).
For a full discussion of these requirements, see “Understanding paths and naming conventions” on page 23.
Appendix A, “Configuration Examples,” provides a simple configuration example for using these commands to create and present a single LUN to a host. It also includes sample output from SHOW commands.
Note: Commands are not case sensitive, and it is often not necessary to type complete command names. For example, you can type sho for SHOW or shu for SHUTDOWN.
28 | Command View EVA Storage System Scripting Utility Reference Guide |
