SSSU Command Reference
RESTART
Use the RESTART command to restart a controller shown by the SHOW POWER command.
A power object is a controller.
Syntax
RESTART <controller_name>
Switches
The following switches are available for the RESTART command:
■ALL_PEERS
■NOALL_PEERS
These switches are described in the following paragraphs.
ALL_PEERS
Restarts all peer controllers (both controllers) on this system.
NOALL_PEERS
Default. Restarts only the specified controller.
Examples
RESTART “\Hardware\Rack 1\Enclosure 7\Controller B” ALL_PEERS RESTART “\Hardware\Rack 1\Enclosure 7\Controller A” NOALL_PEERS
The first example restarts Controller B, including its peer controller.
The second example restarts Controller A, but not its peer controller.
68 | Command View EVA Storage System Scripting Utility Reference Guide |
