
Glossary
preferred path
A preference for which controller of the controller pair manages the virtual disk. This preference is set by the user through the Command View EVA when creating the virtual disk. A user can change the preferred path of a virtual disk at any time. The main purpose of selecting a preferred path is load balancing.
read ahead caching
A cache management method used to decrease the subsystem response time to a read request by allowing the controller to satisfy the request from the cache memory rather than from the disk drives.
read caching
A cache method used to decrease subsystem response times to a read request by allowing the controller to satisfy the request from the cache memory rather than from the disk drives. Reading data from cache memory is faster than reading data from a disk. The read cache is specified as either on or off for each virtual disk. The default state is on.
redundancy
■Element
■Data
SCSI (small computer system interface)
■An American National Standards Institute (ANSI) interface that defines the physical and electrical parameters of a parallel I/O bus used to connect computers and a maximum of 16 bus elements.
■The communication protocol used between a controller pair and the hosts. Specifically, the protocol is
SCSI-3
The ANSI standard that defines the operation and function of Fibre Channel systems.
Command View EVA Storage System Scripting Utility Reference Guide | 121 |