SSSU Command Reference
ADD SYSTEM
Use the ADD SYSTEM command to initialize an uninitialized storage system and to create a default disk group. You must select an uninitialized storage system before issuing the ADD SYSTEM command. If the system is already initialized, the command is rejected.
Use the SHOW SYSTEM command (see “SHOW SYSTEM” on page 100) to display the names of the available uninitialized storage systems. The uninitialized storage system display as Uninitialized Storage System#>, in which
#represents a number. After initialization is complete, SSSU changes its default prompt back to NoSystemSelected>.
Because the system’s name changed from the uninitialized string to the name given with the ADD SYSTEM command, you must reselect the system. Issue the SELECT SYSTEM command using the new name of the system.
Note: Appendix A includes a configuration example that explains the sequence of commands you can use to initialize an uninitialized storage system (see “Creating a simple configuration” on page 106).
Syntax
ADD SYSTEM <system_name>
Switches
The following switches are available with the ADD SYSTEM command.
COMMENT=
This is an optional switch that associates a
CONSOLE_LUN_ID=
The LUN used for console communication after system creation. If set to zero, no console LUN is presented to the host.
42 | Command View EVA Storage System Scripting Utility Reference Guide |
