SSSU Command Reference
SET SYSTEM
Use the SET SYSTEM command to modify system properties.
Syntax
SET SYSTEM <name>
Switches
The following switches are available for the SET SYSTEM command.
COMMENT=
This is an optional switch that associates a
CONSOLE_LUN_ID=
The LUN used for console communication. If set to zero, a console LUN is not presented to the host.
Note: This value is used for IBM AIX (set to zero), OpenVMS (required), and Tru64 UNIX (recommended). Other host operating systems ignore the value. See the host operating system installation guides for more information.
NAME=
New name to give to the specified system.
Example
SET SYSTEM engineering NAME=accounting
This example renames the system engineering to accounting.
86 | Command View EVA Storage System Scripting Utility Reference Guide |
