CONTROLS AND FUNCTIONS

GLEARN

Used for setting up the manufacturer code or for programming the functions of other remote controls (see pages 81 and 82).

HMACRO

Used to program a series of operations for control by a single button (see page 84).

IMACRO ON/OFF

Turns the macro function on and off.

JInput selector buttons

Selects the input source and changes the control area.

KMULTI CH IN

Selects the source connected to the MULTI CH INPUT jacks. This source takes priority over the source selected with INPUT SELECTOR (or the input selector buttons on the remote control).

LOperation buttons

Operate various parameters and commands shown in the on-screen display.

MEXIT

Press to exit the on-screen display menus.

NTOP

Press to display the top level of the on-screen display menus.

OSound field program

Use to select sound field programs.

PMUTE

Mutes the sound. The MUTE indicator turns on when the MUTE function is on. Press again to restore the audio output to the previous volume level.

QVOLUME +/–

Increases or decreases the volume level.

RSTRAIGHT/EFFECT

Switches the sound fields off or on. When STRAIGHT is selected, input signals (2-channel or multi-channel) are output directly from their respective speakers without effect processing.

SSPEAKERS A/B

Turn on or off the set of front speakers connected to the A and/or B terminals on the rear panel each time the corresponding button is pressed.

TCover

Slide down to use the concealed buttons for various setup and parameter operations.

GUI remote control

This section describes the controls and functions of the GUI remote control. See “USING THE GUI REMOTE CONTROL” on page 29 for details.

SYSTEM

POWERSTANDBY

15

2

ENTER

 

3

 

 

4

TOP

EXIT

 

 

 

+

 

 

VOL

6

–

MUTE

7

1SYSTEM POWER

Turns on this unit’s power.

2Multi-control/ENTER

Tilt up/down or left/right to navigate through the various parameters and commands shown in the on-screen display. Press to choose the selected item in the on-screen display.

3TOP

Press to display the top level of the on-screen display menus.

4EXIT

Press to exit the on-screen display menus.

5STANDBY

Sets this unit in the standby mode.

6VOLUME +/–

Increases or decreases the volume level.

7MUTE

Mutes the sound. The MUTE indicator turns on when the MUTE function is on. Press again to restore the audio output to the previous volume level.

8