SYSTEM OPTIONS

■Analog Level (Analog level)

Use this feature to select the analog input signal.

Input Select > input source (DVD, etc.) > Analog Level Choices: STD, HIGH

•Normally, select STD.

•Select HIGH if the analog input level is higher than normal or the sound seems distorted.

■BGV (Background video)

Use this feature to select which video signal will be output when MULTI CH is selected.

Input Select > MULTI CH > BGV

Choices: DVD, DTV/LD, CABLE, SAT, VCR1, VCR2, DVR, V-AUX, Last, OFF

•Select Last if you want this unit to use the last video input source that was selected.

•Select OFF if you do not want a video image to be output.

Note

Even when Last is selected, the last video input source selected will not be used after PURE DIRECT is selected or this unit is set to standby mode.

■Input Channels (Input channels)

Use this feature to specify the number of audio channels input through the MULTI CH INPUT jacks.

Input Select > MULTI CH > Input Channels Choices: 2ch, 5.1ch, 7.1ch

•Select 2ch if you want to input stereo audio signals using only the FRONT L/R jacks.

•Select 5.1ch if you want to input 5.1-channel audio signals through the FRONT L/R, CENTER, SURROUND L/R and SUBWOOFER jacks.

•Select 7.1ch if you want to input 7.1-channel audio signals through all jacks.

60