■FRONT terminals

Connect one or two speaker systems to these terminals. If you use only one speaker system, connect it to either of the FRONT A or B terminals.

Note

The Canada model cannot output to two separate speaker systems simultaneously.

Bi-wired connection

The unit also allows you to make bi-wired connections to one speaker system. Use two pairs of speaker cables for each speaker (one pair for the woofer and one pair for the tweeter/mid-range). To use the bi-wired connections, press SPEAKERS A and SPEAKERS B on the front panel so that both SP A and B light up on the front panel display.

Bi-wired connection

This unit

SPEAKER SETUP

■PRESENCE/ZONE 2 terminals

Connect presence speakers to these terminals. You can also use these terminals for connecting Zone 2 speakers (see page 94).

Note

The presence speakers output ambient effects created by the DSP sound fields. They do not output sound when other sound fields are selected.

PREPARATION

■CENTER terminals

Connect a center speaker to these terminals.

■SURROUND terminals

Connect a surround speaker system to these terminals.

■SUBWOOFER jacks

Connect one or two subwoofer(s) with built-in amplifier, such as the YAMAHA Active Servo Processing Subwoofer System, to the jack(s).

■SURROUND BACK terminals

Connect a surround back speaker system to these terminals. If you only connect one surround back speaker, connect it to the left (L) terminals.

English

15