Clearing individual functions
■Clearing a learned function
You can clear the functions learned in programmed buttons for each area.
1Press an input selector button to select the source component that contains the function you want to clear.
The selected component name appears in the display window.
CABLE SAT MD/TAPE
DTV/LD | VCR 1 | VCR 2 | DVR | DVD |
2Press LEARN using a ballpoint pen or similar object.
“LEARN” and the selected component name appear alternately in the display window.
LEARN
Flashes alternately
y
Complete each of the following steps within 30 seconds. Otherwise the learning mode is automatically canceled. In this case, press LEARN again.
3Press and hold CLEAR using a ballpoint pen or similar object, then press the button you want to clear for about 3 seconds.
“C:OK” appears in the display window.
MACRO
TRANSMIT
SYSTEM
POWER STANDBY
CABLE SAT MD/TAPE
DTV/LD | VCR 1 | VCR 2 | DVR | DVD |
When you clear a learned function, the button reverts to the factory setting (or manufacturer setting if you have set manufacturer codes).
REMOTE CONTROL FEATURES
4Repeat step 3 if you want to clear other learned functions.
5Press LEARN to exit the clear mode.
■Clearing macro functions
1Press MACRO using a ballpoint pen or similar object.
MACRO
y
Complete each of the following steps within 30 seconds. Otherwise the learning mode is automatically canceled. In this case, press MACRO again.
2Press and hold CLEAR using a ballpoint pen or similar object, then press the macro button you want to clear for about 3 seconds.
“C:OK” appears in the display window.
MACRO
TRANSMIT
SYSTEM
POWER STANDBY
CABLE SAT MD/TAPE
DTV/LD | VCR 1 | VCR 2 | DVR | DVD |
When you clear a macro, the button reverts to the factory setting (or manufacturer setting if you have set manufacturer codes).
3Repeat step 2 if you want to clear other macro functions.
4Press MACRO to exit the clear mode.
MACRO
OPERATION | ADVANCED |
|
|
English
87