■Displaying information about the input

source

You can display signal information for the audio or video signal currently being input.

Remote control operation

1Press TOP on the GUI remote control.

2Press n repeatedly to select Signal Info.

The signal information appears on the GUI display.

y

Press h to switch between the Audio Info and Video Info screens.

Audio signal information

Format

Signal format display. When the unit cannot detect a digital signal, it automatically switches to analog input.

Sampling

Sampling frequency. When the unit is unable to detect the sampling frequency, “Unknown” appears.

Channel

Number of source channels in the input signal. For example, a multi-channel sound track with 3 front channels, 2 surround channels and LFE, is displayed as “3/2/0.1”.

Bitrate

Bit rate. When the unit is unable to detect the bit rate, “Unknown” appears.

Dialogue

Dialog normalization information for Dolby Digital signals.

Flag 1/Flag 2

A signal format capable of identifying special operation commands contained in audio input signals.

PLAYBACK

Video signal information

Resolution

Resolution for video input/output signals. When the unit is unable to detect the resolution, “–” appears.

•Both the input and output resolution are displayed simultaneously.

Aspect

Aspect ratio for video input/output signals. When the unit is unable to detect the aspect ratio, “–” appears.

•Both the input and output aspect ratios are displayed simultaneously.

Copy Protect

Presence of copyright-protected video input signals. When the unit is unable to determine whether any copyright- protected signals are present, “– – –” appears.

y

You can also perform this operation using the GUI remote control (see page 29).

OPERATION

BASIC

 

 

English

45