AUTO SETUP
■Troubleshooting for the auto setup procedure
Before auto setup
Error message | Cause | Remedy |
|
|
|
Connect MIC! | Optimizer microphone is not connected. | • Connect the supplied optimizer microphone to the |
|
| OPTIMIZER MIC jack on the front panel. |
|
|
|
Unplug Phones! | Headphones are connected. | • Unplug the headphones. |
|
|
|
No Setup Menu! | No setup menu items have been selected. | • Select at least one setup menu item. |
|
|
|
Memory Guard! | This setting is protected. | • Remove the protection setting for auto setup (see |
|
| page 78). |
|
|
|
During auto setup
Press l / h to display detailed information for individual errors. Select Retry to try the auto setup procedure again.
Error message | Cause | Remedy |
|
|
|
E01:No Front SP | Front L/R channel signal(s) is (are) not | • Select the front speakers with SPEAKERS A or B. |
| detected. | • Check the front L/R speaker connections. |
|
|
|
E02:No Surr. SP | A surround channel signal is not detected. | • Check the surround speaker connections. |
|
|
|
E03:No Pres. SP | A presence channel signal is not detected. | • Check the presence speaker connections. |
|
|
|
E04:SBR | Only the surround back right channel signal is | • Connect the surround back speaker to the LEFT |
| detected. | SURROUND BACK SPEAKERS terminal if you |
|
| only have one surround back speaker. |
|
|
|
E05:Noisy | Background noise is too loud. | • Try auto setup in a quiet environment. |
|
| • Turn off noisy electric equipment like air |
|
| conditioners, or move it away from this unit. |
|
|
|
E06:Check Surr. | Surround back speaker(s) is (are) connected, | • Connect surround speakers when using (a) surround |
| though surround L/R speakers are not. | back speaker(s). |
|
|
|
E07:No MIC | The optimizer microphone was unplugged | • Connect the supplied optimizer microphone to the |
| during the auto setup procedure. | OPTIMIZER MIC jack on the front panel. |
|
|
|
E08:No Signal | The optimizer microphone does not detect test | • Check the microphone setting. |
| tones. | • Check the speaker connections and placement. |
|
|
|
E09:User Cancel | The auto setup procedure was cancelled | • Perform the auto setup procedure again. |
| because a setting that affects auto setup was |
|
| changed during the procedure. |
|
|
|
|
E10:Internal Err | No DSP response. | • Restart this unit, then try the auto setup procedure |
|
| again. |
|
|
|
E11:Complex Err | Multiple errors occurred. | • Check the speaker connections and placement. |
|
|
|
E12:No Speaker | All 9 speakers and 2 subwoofers are not | • Check the speaker connections and placement. |
| connected. |
|
|
|
|
PREPARATION
English
35