Presence (Presence speakers)

Choices: None, Yes

•Select None if you do not have presence speakers. This unit directs all presence channel signals to the front left and right speakers.

•Select Yes if you have presence speakers.

Note

When Zone2 Amplifier is set to Internal (see page 78), Presence is automatically set to None.

Cross Over (Cross over)

Use this feature to select a cross-over (cut-off) frequency for all low-frequency signals. All frequencies below the selected frequency are sent to the subwoofer.

Choices: 40Hz, 60Hz, 80Hz (THX), 90Hz, 100Hz, 110Hz, 120Hz, 160Hz, 200Hz

80Hz (THX)

• Select 80Hz (THX) when using a THX system.

SYSTEM OPTIONS

■Speaker Level (Speaker level)

Use these settings to manually balance the speaker levels between the front left speakers and each speaker selected in Speaker Set (see page 67).

Manual Setup > Basic > Speaker Level

Choices: –10.0 dB to +10.0 dB

•Front L adjusts the balance of the front left speaker.

•Front R adjusts the balance of the front right speaker.

•Center adjusts the balance of the center speaker.

•Surround L adjusts the balance of the surround left speaker.

•Surround R adjusts the balance of the surround right speaker.

•Surround Back L adjusts the balance of the surround back left speaker.

•Surround Back R adjusts the balance of the surround back right speaker.

•Presence L adjusts the balance of the front left and presence left speakers.

•Presence R adjusts the balance of the front left and presence right speakers.

•Subwoofer L adjusts the balance of the left subwoofer.

•Subwoofer R adjusts the balance of the right subwoofer when two subwoofers are connected.

y

To calibrate correctly to THX reference levels, use the internal pink noise generator (see page 54).

Notes

•You cannot adjust the level of channels set to None in Speaker Set.

•If you are only using one surround back speaker, connect it to the SURROUND BACK (SINGLE) jack, and adjust the balance in Surround Back L.

OPERATION

ADVANCED

 

 

English

69