TONE
CONTROL
MULTI JOG

PLAYBACK

7Select a sound field program if desired.

Press DSP PROGRAM then rotate MULTI JOG (or on the remote control, set 10KEY/AMP to AMP, then press one of the sound field program buttons repeatedly) to select a sound field program. (See page 48 for details about sound field programs.)

MULTI JOG

 

10KEY

AMP

STEREO

HALL#1

HALL#2

CHURCH

DSP

 

 

1

2

3

4

PROGRAM

or

 

5

6

7

8

 

 

 

JAZZ

ROCK

MUSIC

ENTERTAIN

 

6.1/5.1

MOVIE

THX

/DTS

NIGHT

 

 

 

9

0

+10

+100

 

CHP/INDEX

 

 

 

 

 

Front panel

Remote control

Note

When this unit detects Dolby Digital signals, the following display appears for a few seconds. This shows how the signal level is being corrected to become –27 dB (THX recommendation).

DialNorm;;+4dB

To listen with headphones (SILENT CINEMA)

The SILENT CINEMA mode allows you to enjoy multi- channel music or movie sound, including Dolby Digital

To adjust the tone

You can adjust the bass/treble balance for the front left/right, center and subwoofer channels.

Press TONE CONTROL

repeatedly on the front panel to select Treble or Bass.

Select Treble, then rotate MULTI JOG to the right or left to increase or decrease the high-frequency response. Select Bass, then rotate MULTI JOG to the right or left to increase or decrease the low-frequency response.

To cancel the tone control, press TONE CONTROL repeatedly to select OFF.

Notes

•If you increase or decrease the high-frequency or low-frequency sound to an extreme level, the tonal quality of the surround speakers may not match that of the front left/right and center speakers.

•TONE CONTROL is not effective when:

–The THX (page 48) or DIRECT STEREO (page 43) program is selected.

–PURE DIRECT is selected.

•If headphones are connected to this unit, the Tone Control setting adjusts the bass/treble balance of your headphones (page 62).

and DTS surround, through ordinary headphones.

SILENT CINEMA activates automatically whenever you connect headphones to the PHONES jack while listening to CINEMA DSP or HiFi DSP sound field programs. The

To mute the sound

Press MUTE on the remote control. “MUTE” blinks in the front panel display. To resume the audio output, press MUTE

MUTE

“SILENT CINEMA” indicator lights up on the front panel display. (If the sound field programs are off, you listen with normal stereo reproduction.)

again (or press VOLUME +/–). “MUTE” disappears from the display.

y

•You can adjust the muting level (see page 64).

•You can also perform this operation using the GUI remote control (see page 29).

38