
AUTO SETUP
After auto setup
The following warning messages are displayed after analysis is complete to inform you of possible problems. We recommend that you check the contents of each message, then select Retry to try the auto setup procedure again.
Warning message | Cause | Remedy |
|
|
|
W1:Out of Phase | Speaker polarity is incorrect. This message may | • Check the speaker connections. |
| appear depending on the speakers even when |
|
| they are connected correctly. |
|
|
|
|
W2:Over24m/80ft | The distance between the speaker and the | • Bring the speaker closer to the listening position. |
| listening position is over 24 m (80 ft). |
|
|
|
|
W3:Level Error | The difference in volume level between the | • Readjust the speaker installation. |
| speakers is excessive. (No level correction is | • Check the speaker connections. |
| made.) | • Use speakers of similar quality. |
|
| • Adjust the output volume of the subwoofer. |
|
|
|
36