SYSTEM OPTIONS
■Speaker Distance (Speaker distance)
Use this feature to manually input the distance of each speaker and adjust the delay applied to the respective channel. Ideally, each speaker should be the same distance from the main listening position. However, this is not possible in most home situations. Thus, a certain amount of delay must be applied to the sound from each speaker so that all sound will arrive at the listening position at the same time.
To access these parameters, select:
Manual Setup > Basic > Speaker Distance >
Unit (Unit)
Choices: meters (m), feet (ft)
Initial setting:
U.S.A. and Canada models: feet (ft)
Other models: meters (m)
•Select meters to input speaker distances in meters.
•Select feet to input speaker distances in feet.
Choices: 0.3 to 24.00 m (1 to 80 ft)
Initial setting for all speakers:
U.S.A. and Canada models: 10.0 feet
Other models: 3.0 meters
•Front L adjusts the distance of the front left speaker.
•Front R adjusts the distance of the front right speaker.
•Center adjusts the distance of the center speaker.
•Surround L adjusts the distance of the surround left speaker.
•Surround R adjusts the distance of the surround right speaker.
•Surround Back L adjusts the distance of the surround back left speaker.
•Surround Back R adjusts the distance of the surround back right speaker.
•Presence L adjusts the distance of the presence left speaker.
•Presence R adjusts the distance of the presence right speaker.
•Subwoofer L adjusts the distance of the front or left subwoofer.
•Subwoofer R adjusts the distance of the rear or right subwoofer when two subwoofers are connected.
Note
If you reset the default setting for Unit, the above values are also reset.
70