AUTO SETUP

 

If you set Setup Type to Step.

Confirming the results

The results are displayed individually after each analysis.

You can confirm the results of each analysis.

 

If you set Setup Type to Auto.

 

The results are displayed after all items have been

 

analysed.

 

•Press n and select Setup to set the measured values.

•Press k and select Retry to retry the auto setup procedure.

•Press h and select Detail to view information about measurement results and error or warning messages. For more details about error and warning messages, see “Troubleshooting for the auto setup procedure” on page 35.

•Press land select Exit to cancel the auto setup procedure.

•Press n and select Next to start measurement of the next menu item.

•Press kand select Retry to measure the current item again.

•Press h and select Detail to view information about measurement results and error or warning messages. For more details about error and warning messages, see “Troubleshooting for the auto setup procedure” on page 35.

•Press land select Exit to cancel the auto setup procedure.

After all menu items have been measured, “Measurement Over” appears on the screen and the results for each item are displayed.

•Press n and select Setup to set the measured values.

•Press k and select Retry to retry the auto setup procedure.

•Press h and select Detail to view information about measurement results and error or warning messages. For more details about error and warning messages, see “Troubleshooting for the auto setup procedure” on page 35.

•Press land select Exit to cancel the auto setup procedure.

y

If you want to make more detailed settings, change the system parameters using the Manual Setup menu. If you want to return to the Auto Setup settings after making settings in the Manual Setup menu, navigate to the Information screen in the Auto Setup menu, press k/n repeatedly to select the parameter you want to adjust, then press ENTER.

Notes

•If you change speakers, speaker positions, or the layout of your listening environment, perform auto setup again to re-calibrate your system.

•In the Distance results, the distance displayed may be longer than the actual distance depending on the characteristics of your subwoofer. This may also be the case when using an external amplifier.

•In the Equalizing results, different values may be set for the same band to provide finer adjustments.

34