
Treble (Treble control)
Use this feature to adjust
Choices:
You can adjust three frequency bands: 2.5kHz, 3.5kHz, 8.0kHz.
Note
TONE CONTROL is not effective when:
–The THX (page 49) or DIRECT STEREO (page 43) program is selected.
–PURE DIRECT is selected.
■LFE Level
Use to adjust the output level of the LFE
To access these parameters, select: Manual Setup > Sound > LFE Level > Choices:
Speaker (Speaker)
Select to adjust the speaker LFE level.
Headphone (Headphone)
Select to adjust the headphone LFE level.
Note
Depending on the settings of LFE Level, some signals may not be output from the SUBWOOFER jack.
SYSTEM OPTIONS
■Dynamic Range (Dynamic range)
Use to select the amount of dynamic range compression to be applied to your speakers and headphones. This setting is effective only when the unit is decoding Dolby Digital and DTS signals.
To access these parameters, select:
Manual Setup > Sound > Dynamic Range > Choices: MAX (maximum), STD (standard), MIN (minimum)
Speaker (Speaker)
Select to adjust the speaker compression.
Headphone (Headphone)
Select to adjust the headphone compression.
•Select MAX for feature films.
•Select STD for general use.
•Select MIN for listening to sources at low volume levels.
■Audio Option (Audio option)
Use to customize this unit’s overall audio settings. To access these parameters, select:
Manual Setup > Sound > Audio Option >
Audio Delay (Audio delay)
Use to delay the sound output and synchronize it with the video image. This may be necessary when using certain LCD monitors or projectors.
Choices: 0 to 200 (ms)
OPERATION | ADVANCED |
|
|
English
63