■Information (Information)
Use this feature to display the following information: operation status of registered i.LINK devices, registered i.LINK devices that have been deleted, and i.LINK signals that are currently being received.
i.LINK Select > Information >
Choices: Details, Delete, Protect, i.LINK Status
•Select Details to display the following information about the selected i.LINK component.
–Vendor: Displays the name of the manufacturer for your i.LINK component.
–Model: Displays the model number for your i.LINK component.
–Active (connected) or Non Active (not connected): Displays depending on whether your i.LINK component is connected.
–Audio (for audio signals) or Non Audio (for non- audio signals): Displays depending on whether your i.LINK component supports audio signal playback.
–Assign: Displays the name of the input assigned to the selected i.LINK component.
•Select Delete to delete the selected i.LINK component from the registered components list. To delete, press
ENTER.
y
To delete all of the i.LINK components from the registered components list, set “All Delete” to Yes in the i.LINK Status screen and press ENTER.
Notes
•Select Protect to prevent the selected component from accidentally being deleted.
•Select i.LINK Status to display the number of i.LINK components registered, the number of i.LINK components currently connected to this unit, and the number of i.LINK components that can be deleted. If an error occurs while using an i.LINK component connected to this unit using an IEEE1394 cable, the contents of the error are displayed here.
•You cannot delete an i.LINK component while it is connected to this unit.
■Select (Select)
Use this feature to select which registered i.LINK component’s audio signal will be selected for playback. i.LINK Select > Select
Select the name of the desired component and press ENTER to switch the input. When you select the desired component, its manufacturer and model information appear along with its input assignment at the right of the screen.
USING i.LINK
■Plug & Play (Plug and play)
Use this feature to select whether you want the unit to automatically switch to the input assign mode when a new i.LINK component is connected.
i.LINK Select > Plug & Play Choices: ON, OFF
•Select ON to display the input assign inquiry message and enter the input assign mode when a new i.LINK component is connected.
•Select OFF if you want MULTI CH INPUT to be assigned as the input without entering the input assign function when a new i.LINK component is connected.
■Input Assign (Input assign)
Use this feature if you want to change the input assignment of a registered i.LINK component. You can select to assign the i.LINK component to any of the various inputs (PHONO to
i.LINK Select > Input Assign >
Choices: PHONO, TUNER, CD,
MULTI CH IN
1Press k/n repeatedly to select the i.LINK component you want to assign, then press h.
2Press k/n repeatedly to select the input for the i.LINK component, then press ENTER.
■Auto Play (Auto Play)
Use this feature to turn on/off automatic playback when an i.LINK component is selected using INPUT SELECTOR, or select whether you want the input to switch automatically when an input stream from a connected i.LINK component is detected.
i.LINK Select > Auto Play
Choices: Z9 → Player, Z9 ← Player, Z9 ↔ Player, Z9 ⋅ Player
•Select Z9 → Player if you want playback to start automatically on the i.LINK component selected using
INPUT SELECTOR.
•Select Z9 ← Player if you want this unit to automatically switch its input to the i.LINK component which has started playing back.
•Select Z9 ↔ Player if you want both playback to start automatically on the i.LINK component selected using INPUT SELECTOR, and you want this unit to automatically switch its input to the i.LINK component which has started playing back.
•Select Z9 ⋅ Player to disable automatic playback for the i.LINK components. This setting also prevents this unit from automatically switching its input to the i.LINK component.
OPERATION | ADVANCED |
|
|
English
99