AUTO SETUP

For Equalizing, select:

 

 

 

7 Press n to select Start, then press ENTER.

Skip

To skip the selected item and perform no

 

 

Loud test tones are output from each speaker and

 

adjustments.

 

“Measuring” appears during the auto setup

Flat

To average the frequency response of all

 

 

procedure.

 

speakers. Recommended if all of your speakers

 

 

 

 

 

are of similar quality.

 

 

Front

To adjust the frequency response of each speaker

 

 

 

in accordance with the sound of your front

 

 

 

speakers. Recommended if your front speakers

 

 

 

are of much higher quality than your other

 

 

 

speakers.

 

 

Low

To average the frequency response of all

 

 

 

speakers, giving priority to the accuracy of bass

 

 

 

frequencies.

 

 

Mid

To average the frequency response of all

 

 

 

speakers, giving priority to the accuracy of mid-

 

 

 

range frequencies.

 

 

High

To average the frequency response of all

 

 

 

speakers, giving priority to the accuracy of high

 

 

 

frequencies.

 

• To pause the auto setup procedure, press one of the cursor

 

 

 

buttons (k/n/l/ h) or ENTER. In the pause mode,

5 Once you have selected the desired setting,

 

press k to RETRY the procedure, lto cancel auto setup,

press l to move back to Setup Menu.

 

or n to skip to the next item without completing the

current procedure.

• If “E10:Internal Err” appears during testing, restart the procedure from step 3.

• If “E12:No Speaker” appears on the GUI display after the Wiring check, all 9 speakers and 2 subwoofers are not connected. If you did connect all of the speakers and subwoofers, first check the physical connections, then press ENTER, and then k (RETRY) to retry the Wiring check.

PREPARATION

6Press n to select Setup Type, then select:

Auto

To automatically perform the entire

 

auto setup procedure.

Step

To pause for confirmation between

 

each check in the auto setup procedure.

English

33