Yamaha DSP-Z9 ZONE, Zone 2 connections

ZONE 2

This unit allows you to configure a multi-room audio-video system. The Zone 2 feature enables you to set this unit to reproduce separate input sources in the main room and second room (Zone 2) using the supplied remote control from the second room.

Zone 2 connections

You need the following additional equipment to use this unit’s multi-room functions:

•An amplifier and speakers for the second room.

•A video monitor for the second room.

OUT	IN	OUT	IN		REMOTE
OUT	IN	OUT	IN	CONTROL OUT

This unit

•Since there are a number of ways you can connect and use this unit in a multi-room installation, we recommend that you consult your nearest authorized YAMAHA dealer or service center for the Zone 2 connections that best meet your requirements.

•Some YAMAHA models are able to connect directly to this unit’s REMOTE CONTROL OUT jack. If you own these types of products, you may not need to use an infrared emitter. Up to 6 YAMAHA components can be connected as shown here.

■System configuration and connection example

Using external amplifiers

To use an external amplifier in Zone 2, select External in ZONE2 AMP.

		ZONE 2 VIDEO OUT
		ZONE 2 AUDIO OUT or
		ZONE 2 COAXIAL OUT
		Amplifier Video
		monitor
DVD player
(or other component)	This unit	Remote control
DVD INPUT
		Infrared signal
		receiver
Infrared emitter
Main room		Second room
REMOTE CONTROL OUT		ZONE 2 REMOTE IN

Notes

•When not using the main room, turn down the volume of this unit in the main room. Adjust the Zone 2 volume using the amplifier in the second room.

•To avoid unexpected noise, DO NOT USE the Zone 2 feature with CDs encoded in DTS.

•Dolby Digital RF signals and signals input through an i.LINK connection are not output from ZONE 2 COAXIAL OUT. Further, the Zone 2 volume setting does not apply to signals output from ZONE 2 COAXIAL OUT (i.e., input signals are output at the same volume they are input).

OPERATION	ADVANCED

English