Manual setup: Video
Use this menu to adjust the video parameters.
y
If output to the monitor fails while you are performing the parameter setup procedure, the setting of this unit’s video parameters could be incompatible with your video monitor. Press and hold down EXIT on the remote control for 5 seconds or longer to initialize the Video parameters.
Initial settings:
•TV format (TV format):
–U.S.A., Canada, Korea and General models: NTSC
–Other models: PAL
•Resolution (resolution): 480i/576i
•Only TV Format and S Video are avaiable for progressive or high definition signals (signals with a resolution of 480p/576p or greater).
•Image processing may not be available for non- standard signals such as those output by some game machines.
1Press TOP on the GUI remote control.
2Select Manual Setup, then press h.
SYSTEM OPTIONS
■Processor (Processor)
Use this feature to turn on/off the digital video processors. Manual Setup > Video > Processor
Choices: Off, On
•Select Off to turn off the digital video processors.*
•Select On to turn on the digital video processors.
*The signal is output without effect processing. (This setting does not affect the GUI display.)
Notes
•For optimal video performance, THX recommends setting Processor to Off.
•When playing back video that contains teletext or other additional signals, the additional signals may not be played back if you select On. If this happens, select Off.
•When you press TOP on the GUI remote control, the video processing system is enabled and the GUI screen displayed even if Off is selected.
3Select Video, then press h.
4Select the desired parameters, then press h to access and adjust.
OPERATION | ADVANCED |
|
|
English
71