124 Chapter 2. SONG MODE

3. If you want to set an explicit percentage, press d
[D4] again to move the cursor to the lower part of the
area.
4. Set the percentage value, using the data dial, n/y,
or the numeric keypad.

m/REST

• You use this key to enter a rest. First set the step value to the
rest time that you want to use, and then press m. The
rest is entered, and the location pointer advances accord-
ingly.
•Example To enter a quarter-note rest: Set the step time to
quarter note, then press m.

s/TIE

• You use this key to enter a musical tie. This extends the
length of the note you just entered, by adding an additional
step time.
• To use this feature, you begin by setting the step time for
the first note in the tie, and entering the note. You then set
the step time for extension note. You then press s.
•Example Assume that you want to set up the tie illustrated
below.
1. Set the step time to quarter note.
2. Enter the C.
3. Set the step time to eighth note.
4. Press s
(TIE).
▼The original quarter note is extended by an eighth-note in-
terval. (The note bar on the piano roll indicates the extended
length.)

5 (BkDelete)

Back delete
• You use this function to delete the last note or rest that you
entered. This provides a simple way to remove your incor-
rect entries.
• When you press 5 (BkDelete), the QY700 deletes the
last note entry and moves the location pointer back by one
step. You can then enter the correct value.

6 (Delete)

• This function deletes all notes that begin directly under the
location pointer.
5. Song Recording
Removes the last entered note,
and moves location pointer one step back.
Tie