24
SETUP
4. Press d [D1] (All Data).
The Load All Data page will appear, and the filenames will
be displayed.
5. Use the cursor keys / data dial to move the cursor to
“STYLE” and press e.
A message of “Are You Sure? (Y/N)” will appear, asking
whether it is OK to erase the data in internal memory and
load the data from disk.
If you do not wish to erase the data currently in memory,
press n to halt loading. Then save the data in memory to
a disk, and perform the loading procedure once again. (
p.307)
6. Press y.
The display will indicate “Executing...” and the data will be
loaded.