66
BASIC CONCEPTS
Chapter 1
Modifying the voice of track 1
Let’s modify the voice that is being used by the track 1
melody.
1. Press v to enter Voice mode.
2. Press 3 (VoicEdit) to enter Voice Edit.
3. Press d to set Part to 1.
4. Move the cursor.
Move the cursor to the parameter that you wish to modify.
5. Modify the value.
Use the data dial, n/y, or the numeric keypad e to
modify the value.
Use the following table as a guideline for modifying the
values.
Now let’s playback.
Press the sequencer key p to playback the song.
Playback the song while you modify the voice, and notice
how the voice changes.
Portamento
Data display
EG attackResonance
Cutoff
Mono/Poly
PORTAMENT FILTER EG
MONO/POLY SW TIME CUTOFF RESNANCE ATTACK
MONO ON 07 +16 +43 -64