89Chapter 2. SONG MODE

2
where “interval time” refers to the number of clock cycles be-
tween interval lines. Note that positive values shift notes to-
ward the end of the song, while negative values shift them to-
ward the beginning.
1. Move the cursor to the clock-shift setting (in the grid
area) for the appropriate interval.
2. Adjust the value using the data dial, n/y , or the
numeric keypad.

13. Gate-time multiplier

• This value adjusts the gate times for each interval.
• If you are using a preset template, you can not change these
values. If you are using a user template, you can edit the
values as described below.
• The multiplier is only one of the factors determining the
final gate-time adjustment. Specifically, the gate time is
adjusted by the combined action of the multiplier and the
GROOVE GATETIME setting (see Section 9 above).
0101
1101
000%,...,100%,...,200%
1. Move the cursor to the gate-time multiplier setting (in
the grid area) for the appropriate interval.
2. Set the value using the data dial, n/y, or the nu-
meric keypad.

14. Velocity offset

• This value applies offsets to the velocity values. Again, off-
sets can be different for each interval.
• If you are using a preset template, you can not change these
values. If you are using a user template, you can edit the
values as described below.
• This offset is only one of the factors determining the final
velocity adjustment. Specifically, the velocity is adjusted
by the combined action of the offset and the GROOVE VE-
LOCITY setting (see Section 10 above).
0101
1101
–99%,...,00%,...,+99%
1. Move the cursor to the velocity-offset setting (in the
grid area) for the appropriate interval.
2. Set the value using the data dial, n/y, or the nu-
meric keypad.

5

(CopyTmp)

Copy template
• This function copies the currently selected groove template
into the user template for a designated song or style.
• You can set up one user template for each song, and one for
each style.
• The values in the window select the destination.
0101
1101
Destination: Song 01,...,20; Patt 01,...,64
1. At the “Groove View” page, select 5 (CopyTmp).
▼The screen displays the Copy to User Template window.
2. Select the destination values (Song or Patt in the left
box, and the appropriate number in the right box) us-
ing the data dial, n/y, and numeric keypad.
2. Play Effects
Currently selected
groove template
User template for
selected destination
(song or style)

Copy