Yamaha QY700 JOB 10 SHIFT EVENT

153
2
Chapter 2. SONG MODE
7. Song Jobs
JOB 10 SHIFT EVENT
4. Destination event
• The two boxes at the bottom select the event type that re-
places the “source” event.
0101
1101
CC 001,...,031,033,...,127 Control-change event
CAT Channel aftertouch
PB MSB Pitch bend (With the LSB
argument set to 00)
Note Note event (where original
argument gives the new note
number; velocity is set to 64;
and gate time is set to 108.)
Note Note event (where original
argument gives the new ve-
locity; the note is set to C3;
and gate time is set to 108.)
• This job replaces all occurrences of a specified event type
(within the selected segment of the selected sequence track)
with some other designated event type. Although the event
type itself is replaced, the accompanying argument (param-
eter value) is retained and applied to the new event type.
• As an example, you can use this function to change breath-
controller events into channel-aftertouch events, while leav-
ing the magnitude of the event unchanged.
1. Track setting: TR
• This parameter selects the target track.
0101
1101
01,...,32
2. Segment
• The two boxes to the right of the M select the target track
segment.
0101
1101
Measure: beat 001:1,...,999:8
3. Source event
• The two boxes at the center select the event type to be re-
placed.
0101
1101
CC 001,...,031,033,...,127 Control-change event
CAT Channel aftertouch
PB MSB Pitch bend MSB
Note Note event (where the note-
number argument is re-
tained.)
Note Note event (where the veloc-
ity argument is retained.)
Note (Velo=64)
Note (Velo=64)
Velo# (Note=C3)
Velo# (Note=C3)