205Chapter 5. PATTERN MODE

5
0101
1101
Tempo 25.0,...,300.0 (=q )
Meter 1/16,...,16/16; 1/8,...,16/8; 1/4,...,8/4
1. Press d [D2] as necessary to move the cursor to
the tempo or meter setting.
2. Set the value using the data dial, n/y, or the nu-
meric keypad.
8. Click beat, click mode, and count
• These parameters set up the sequencer’s click sound.
• The beat value sets the click interval.
• The mode setting determines when the click feature is used.
• The count value sets the number of preliminary measures
used as a lead-in for realtime recording.
0101
1101
Click mode:
Off Disables the click feature.
Rec Use click for realtime and punch recording only.
Ply Use click for realtime recording, punch recording,
and playback.
All Always use click.
Click beat
x, e, q, h, w
Count
Off, 1,...,8Ms
1. Press d [D4] as necessary to move the cursor to
the appropriate click parameter.
2. Set the value using the data dial or n/y. (For the
click beat, you can also set the value by pressing the
appropriate note key on the numeric keypad.)
9. Data display
• This area shows the name of the currently selected phrase,
or the value of the currently selected scale-time or beat-
shift setting.
10. Track number11. Measure
• The lower half of the PATCH screen presents a matrix show-
ing the pattern’s phrase arrangement, with the track num-
bers running down the left side and the measure numbers
running across the top.
• The track numbers run from 1 to 16. The measure numbers
run from M001 (measure 1) to the final measure in the pat-
tern. The entire arrangement cannot fit on the screen, but
you can scroll in any direction as required.
• You can edit the pattern by entering any phrase, or a rest
value, at any location on the matrix.
0101
1101
Track 1,...,16
Measure M001,...,
pattern length
(where pattern length is set by the second value
in the [D1] entry area; see page 204.)
• Move to the appropriate matrix position using
u/d, and/or the cursor keys.
1. PATCH