195Chapter 4. EFFECT MODE

4
• If Variation Mode is set to Insertion, setting the Effect T ype
of the Variation effect to “No Effect” will mean that the part
whose Variation Switch is ON will not sound.
2. Effect parameters
• Here you can make detailed settings for each effect.
• Each effect type has different parameters.
3. Dry/Wet (only for Variation edit)
• This sets the balance between the sound processed by the
Variation effect (the “Wet” sound), and the unprocessed
sound (the “Dry” sound).
• This can be set only if Variation Type = Insertion. If Varia-
tion Mode = System, this will be fixed at D32>W.
0101
1101
D63>W – D=W – D<W63
4. Control (only for Variation edit)
•A symbol will be displayed to indicate a parameter that
can be controlled using control change messages.
• When Variation Type is set to Insertion, this can be used for
parts whose Variation switch is ON.
5. AC1 control (only for Variation edit)
• This specifies the depth with which AC1 (assignable con-
troller) can be used to control the parameter indicated by
the control symbol.
• With a setting of 0, control will not be possible. As this
setting is increased, a greater amount of control will be pos-
sible. With negative settings, raising the controller will lower
the parameter value.
• Assignable controllers are controllers whose control number
can be set freely. The QY700 provides two assignable con-
trollers: AC1 and AC2. Assignable controller settings are
made using Exclusive messages.
• This can be set only when Variation Type = Insertion. This
parameter will not be displayed when Variation Mode = Sys-
tem.
0101
1101
-64 – +0 –␣ +63

2. Reverb edit, Chorus edit, Variation edit