296 Chapter 6. UTILITY MODE

3. Interval time
When system exclusive data (bulk data) recorded in a se-
quence track is played back, an interval of the duration speci-
fied by this setting will be inserted between each 1 KB (kilo-
byte) of data.
When bulk data that was recorded is re-transmitted to an
external MIDI device, limitations of the receiving device’s
bulk data processing power may result in MIDI errors. By
setting an appropriate Interval Time, you can transmit bulk
data at a rate that the receiving device is able to process.
In sequence tracks, each unit of system exclusive data is
recorded in a single location of time. However when this
data is played back, the Interval Time function will insert a
delay between each 1 KB of data. The delay is specified in
units of 100 ms (1/10 second).
If MIDI errors occur on the receiving device, increase the
Interval Time setting and try transmitting the data again.
0101
1101
0 – 9 * 100 (msec)
Interval Time settings may cause playback to be delayed.

4. Sequencer