239Chapter 5. PATTERN MODE

5
4. Pattern Effects
4. Pattern Effects
• You use the Pattern Effects submode to select and set up the
effects applied to the pattern.
• The Pattern Effects submode comprises four pages. You
access these pages by pressing the corresponding function
keys (1, 2, 3,4). Note that you can
exit to a different submode by pressing 5 or 6.
•1 (Connect) displays the “Effect Connection Setup”
page. You use this page to set up the effect connection con-
figuration: the variation mode, the effect type, the return
level, and so on. (→ p.241)
•2 (Reverb) calls the “Reverb Edit” page. This page
selects the reverb type and sets the various reverb param-
eters. (→ p.244)
•3 (Chorus) calls the “Chorus Edit” page. This page
selects the chorus-effect type and sets the various chorus
parameters. (→ p.244)
•4 (Vari.) calls the “Variation Edit” page. This page
selects and sets up the variation effect. (→ p.244)
•5 (→ PlayFx) switches you into Play Effects submode,
where you can set up the playback effects applied to each
style. (→ p.212)
•6 (→ Voice) switches you into Pattern V oice submode,
where you can set up the voicing for each style. (→ p.225)
• The variation mode setting (accessible from the Effect Con-
nection Setup screen) determines how the QY700 handles
effects processing. The illustration on the next page shows
the two possibilities. For more information, refer to Chap-
ter 1. (→ p.48)
• The playback keys (p, s, t, r/f) continue to
function while you are adjusting the settings, so that you
can monitor the results of your changes as you make them.
3Pattern Effects
1ÊEffect Connection Setup
2ÊReverb Edit
3Chorus Edit
4Variation Edit
pPATCH