224 Chapter 5. PATTERN MODE

24. Velocity rate
• This Velocity Rate parameter adjusts the velocity of the re-
placement rhythm instrument (the instrument named in the
To column).
• To calculate the adjusted velocity, the QY700 multiplies the
original velocity value by the Velocity Rate value. A Veloc-
ity Rate of 100% produces no adjustment, while larger val-
ues increase the velocity and lower values reduce it.
• This parameter allows you to adjust for loudness imbalances
that may occur when you replace one instrument with an-
other. You may also want to use it to experiment with your
own customized velocity adjustments.
0101
1101
000%,...,100%,...,200%
1. Move the cursor to the Velocity Rate icon for the list
entry you want to adjust.
2. Set the value using the data dial, n/y, or the nu-
meric keypad.
1 (Clear)
• Press 1 (Clear) to delete the entry on the selected line
of the table.
• If you press 1 while the cursor is in the From column,
the QY700 deletes both the From and the To entries for that
line.
• If you press 1 while the cursor is in the To column,
only the To item will be deleted. (If the To entry is left blank,
the “From” instrument will be muted.)
1. Move the cursor to the appropriate entry.
2. Press 1 (Clear).
2 (Default)
• Press 2 (Default) to reset the drum table to its default
values. All of the From, To, and Velocity Rate settings re-
turn to their defaults.
1. Press 2 (Default).
▼The table resets to its defaults.
2. Play Effects
Original velocities
Velocity Rate = 50%
(Vel)
96 64 32 96 96
Velocity Rate = 150%
(Vel)
115 76 38 115 115
(Vel)
48 16 48 48
32