154 Chapter 2. SONG MODE

JOB 11 COPY EVENT
7. Song Jobs
0101
1101
Measure: beat 001:1,...,999:8

4. Destination song

• The lower Song value selects the destination song.
0101
1101
01,...,20

5. Destination track

• The lower TR value selects the destination track.
0101
1101
01,...,32, Pat, Chd, Tmp, All
• 01,...,32 Sequence track
• Pat PATTERN track
• Chd CHORD track
• Tmp TEMPO track
• All All tracks
NOTE: The source and destination tracks must be the same
type. If you set the above value to Pat, Chd, Tmp, or
All, the source track setting will automatically take the
same value. If you set the above to a sequence track,
the source must also be a sequence track.

6. Start point of destination segment

• The first box to the right of the M (on the lower line of the
screen) selects the start point for the copy on the destina-
tion track.
0101
1101
Measure: beat 001:1,...,999:8

7. Copy iterations

• The final entry on the job page sets the number of times the
copy is executed.
0101
1101
01,...,99
• This job copies all data from a specified source area (song,
track, and segment) to a specified destination, overwriting
any data already existing at the destination.
• This job is useful when you want to copy data from one
song to another, or when you want to copy or move data
from one area of a track to another.
• Note that this job does not operate on voice settings and
play-effect settings.
• You can choose to copy more than one iteration of the source
data. If you select three iterations, for example, the source
data will be repeated three times on the destination side.
1. Source song
• The upper Song value selects the song from which the data
are to be copied.
0101
1101
01,...,20
2. Source track
• The upper TR value selects the track from which the data
are copied.
0101
1101
01,...,32, Pat, Chd, Tmp, All
• 01,...,32 Sequence track
• Pat PATTERN track
• Chd CHORD track
• Tmp TEMPO track
• All All tracks
NOTE: The source and destination tracks must be the same
type. If you set the above value to Pat, Chd, Tmp, or
All, the destination track setting will automatically take
the same value. If you copy from a sequence track, the
destination must also be a sequence track.

3. Source segment

• The two boxes to the right of the M (on the upper line of the
screen) select the track segment from which data are copied.