176 Chapter 3. VOICE MODE

3. Voice edit
3. Voice edit
SHIFT F1 F2 F3 F4 F5 F6 SHIFT EXIT
2.Location
13.Dry level
12.Pitch bend control
3.Part number
10.EG attack /
EG decay /
EG release
11.Vibrato rate /
Vibrato depth /
Vibrato delay
9.Filter cutoff /
Filter cutoff resonance
4.Mono/Poly 5.Element reserve
6.Velocity sensitivity depth /
Velocity sensitivity offset
7.Portamento switch /
Portamento time
1.Data display
8.MW LFO depth pitch modulation /
MW LFO filter modulation /
MW LFO amplitude modulation
Parameter Values Function See page
P.177
P.177
P.177
P.177
P.177
P.178
P.179
P.179
P.179
P.180
P.180
P.181
P.181
1 Data display
2 Location
3 Part number
4 Mono/Poly
5 Element reserve
6 Velocity sensitivity depth
Velocity sensitivity offset
7 Portamento switch
Portamento time
8 MW LFO depth pitch modulation
MW LFO filter modulation
MW LFO amplitude modulation
9 Filter cutoff
Filter cutoff resonance
10EG attack
EG decay
EG release
11Vibrato rate
Vibrato depth
Vibrato delay
12Pitch bend control
13Dry level (Only when the Effect parameter
Variation Mode=System.)
Displays the data selected by the cursor.
Indicates the playback location of the song in measures and beats.
The part number for which settings are being made is highlighted.
Select the Play mode for each part.
Specify the number of elements that must be reserved for each
part so that the sound does not disappear when the maximum
polyphony is exceeded.
Specify how velocity will affect the volume.
Increase or decrease the overall effect of velocity on the volume.
Specify whether or not portamento will be applied to each part.
Specify how portamento will be applied to each part.
Specify for each part how deeply the LFO effect controlled by the
modulation wheel will affect pitch, filter, and amplitude.
Adjust the frequency at which the filter will take effect, to modify
the tone of each part.
Adjust the filter resonance to modify the tone of each part.
Adjust the time from when a note is played until the maximum
volume is reached.
Adjust the time over which the volume falls from the maximum
level to the sustain level.
Adjust the time over which the volume diminishes to silence after
the note is released.
Adjust the speed at which vibrato will modulate the pitch.
Adjust the depth with which vibrato will modulate the pitch.
Adjust the time from when a note is played to when vibrato be-
gins to take effect.
Specify the range of the pitch change controlled by the PITCH
wheel in semitone units, for each part.
Specify for each part the amount that is sent to the Dry line of the
effect.
display only
001 –999
1– 32
MONO/POLY
00 – 32
000 – 127
000 – 127
OFF/ON
000 – 127
000 – 127
000 – 127
000 – 127
-64 – +00 – +63
-64 – +00 – +63
-64 – +00 – +63
-64 – +00 – +63
-64 – +00 – +63
-64 – +00 – +63
-64 – +00 – +63
-64 – +00 – +63
-24 –+00 – +24
000 – 127
4Drum Setup 1 Edit
5Drum Setup 2 Edit
vVoice Mode
1Mixer
2Tune
3Voice Edit