243Chapter 5. PATTERN MODE
5
9. Chorus-to-reverb
• The Send Chorus to Reverb parameter sets the signal level
on the bus from the chorus block to the reverb block.
0101
1101
001,...,127
10. Variation Type
• This parameter selects the variation effect type.
0101
1101
NO EFFECT, HALL 1, HALL 2, ROOM 1, ROOM 2,
ROOM3, STAGE 1, STAGE 2, PLATE, DELAY LCR, DELAY
L, R, ECHO, CROSSDELAY, ER1, ER2, GATE REV, REVRS
GATE, KARAOKE 1, KARAOKE 2, KARAOKE 3, THRU,
CHORUS 1, CHORUS 2, CHORUS 3, CHORUS 4, CE-
LESTE 1, CELESTE 2, CELESTE 3, CELESTE 4, FLANGER 1,
FLANGER 2, FLANGER 3, SYMPHONIC, ROTARY SP,
TREMOLO, AUTO PAN, PHASER 1, PHASER 2, DISTOR-
TION, OVERDRIVE, AMP SIM, 3-BAND EQ, 2-BAND EQ,
AUTO WAH
11. Variation return
(Available only if variation mode = System)
• This parameter sets the signal level returned from the vari-
ation-effect block. You use this setting to adjust the varia-
tion-effect level for all parts at the same time.
0101
1101
000,...,127
12. Variation pan
(Available only if variation mode = System)
• This parameter sets the stereo positioning the signal from
the variation-effect block.
0101
1101
Left=63,...,Center,...,Right=63
13. Variation-to-chorus
(Available only if variation mode = System)
• The Send Variation to Chorus parameter sets the signal level
on the bus from the variation-effect block to the chorus block.
0101
1101
000,...,127
14. Variation-to-reverb
(Available only if variation mode = System)
• The Send Variation to Reverb parameter sets the signal level
on the bus from the variation-effect block to the reverb.
0101
1101
000,...,127
4. Pattern Effects