Yamaha QY700 49, Variation mode = System

49
BASIC CONCEPTS
Chapter 1
1
Variation mode = System
• When Variation mode is set to System, the three effects will
be connected as shown in the diagram below.
• The signals from all tone generator parts will be sent to the
reverb effect, chorus effect, and variation effect according
to the Voice mode settings Reverb Send Level 1, Chorus
Send Level 2, and Variation Send Level 3. Here you can
adjust the effect depth for each part.
• The overall depth of each effect can be adjusted by the Ef-
fect mode settings Reverb Return Level 4, Chorus Return
Level 5, and Variation Return Level 6. Here you can set
the amount of the signal that is returned from each effect, to
adjust the overall depth of the effect.
• The stereo location of the effect output is determined by the
Effect mode settings Reverb Pan 7, Chorus Pan 8, and
Variation Pan 9.
• If Variation Mode = System, three bus lines will be con-
nected.
Send Chorus To Reverb 0 is a bus line that connects the
Chorus Effect to the Reverb Effect.
Send Variation To Chorus A is a bus line that connects the
Variation Effect to the Chorus Effect.
Send Variation To Reverb B is a bus line that connects the
Variation Effect to the Reverb Effect.
By using these three bus lines, you can use the effects in a
variety of ways, such as connecting the three effects in se-
ries, or dividing them.
Effect blocks diagram in Song mode (Variation mode= INS)
1
16
2
Reverb effect
Chorus effect
1
8
46
57
3
2
17
32
Variation effect
Effect blocks diagram in Song mode (Variation mode = SYS)
1
16
2
0
5
A
B6
7
9
17
32
Chorus effect
Reverb effect
Variation effect
1
2
34
8

1
3
2
Voice mode (mixer)
Effect mode (Effect Connection)
4
5
6
7
8