152 Chapter 2. SONG MODE

JOB 09 CHORD SEPARATE
7. Song Jobs
3. Clock cycles
• The Clock value sets the number of clock cycles inserted
between adjacent chord notes.
• Note that there are 480 clock cycles per beat.
0101
1101
000,...,999
• This job plays opens each chord formation (within the speci-
fied segment of the specified track) into its individual notes,
inserting a specified delay between each note.
• If the Clock value is set to 30, a block chord consisting of
elements C3, E3, G3 will be played as a C3 (at the chord’s
original timing) followed 30 cycles later by the E3, and then
another 30 cycles later by the G3. This feature is useful, for
example, when you want to open up guitar strokes.
• Note that it is not possible to break chords over the next
measure boundary or into the next chord.
1. Track setting: TR
• This parameter selects the target track.
0101
1101
01,...,32
2. Segment
• The two boxes to the right of the M select the track segment
over which chord separations are executed. The first box
sets the measure and beat for the start point; the second box
sets the end point.
0101
1101
Measure: beat 001:1,...,999:8