Yamaha QY700 JOB 06 SHIFT NOTE, JOB 07 SHIFT CLOCK

150 Chapter 2. SONG MODE
JOB 06 SHIFT NOTE
3. Source pitch
• The first box to the right of “Note =” indicates the note
(pitch) to be changed. Each of these notes will be converted
to an equivalent note of the destination pitch.
0101
1101
C-2,...,G8
4. Destination pitch
• The second box to the right of “Note=” selects the new pitch
for the transposed notes.
0101
1101
C-2,...,G8
7. Song Jobs
• This job replaces all occurrences of a specified pitch (within
the selected segment of the selected sequence track) with
some other pitch.
1. Track setting: TR
• This parameter selects the track.
0101
1101
01,...,32
2. Segment and notes (M)
• The two boxes to the right of the M select the track segment
over which notes are to be changed. The first box sets the
measure and beat for the start point; the second box sets the
end point.
0101
1101
Measure: beat 001:1,...,999:8
JOB 07 SHIFT CLOCK
• This job executes a time shift of all data events on the se-
lected segment of the selected track. The shift is executed
in clock-cycle increments.
• If you wish to move events by one or more full beats or
measures, you may find it easier to use the COPY EVENT
job. (→ p.154)