266 Chapter 5. PATTERN MODE

1. Phrase
• The Phrase value selects the user phrase.
0101
1101
01,...,99
2. Segment
• The two boxes to the right of the M select the phrase seg-
ment over which chord sorts are executed. The first box
sets the measure and beat for the start point; the second box
sets the end point.
0101
1101
Measure: beat 001:1,...,256:8

3. Type

0101
1101
Normal Sort from low pitch to high.
Reverse Sort from high pitch to low.
7. Pattern Jobs
Job 09 Chord Separate
• This job opens each chord formation (within the specified
segment of the specified phrase) into its individual notes,
inserting a specified delay between adjacent notes.
• If the Clock value is set to 30, for example, then a block
chord consisting of elements C3, E3, G3 will be played as a
C3 (at the chord’s original timing) followed 30 cycles later
by the E3, and then another 30 cycles later by the G3. This
feature is useful, for example, when you want to open up
guitar chords stroking.
• Note that the QY700 will shorten chord breaks as neces-
sary to avoid playing over the next measure boundary or
into the next chord.
1. Phrase
• The Phrase value selects the user phrase.
0101
1101
01,...,99
2. Segment
• The two boxes to the right of the M select the phrase seg-
ment over which chord separations are executed. The first
box sets the measure and beat for the start point; the second
box sets the end point.
0101
1101
Measure: beat 001:1,...,256:8
3. Clock cycles
• The Clock value sets the number of clock cycles inserted
between adjacent chord notes.
• Note that there are 480 clock cycles per beat.
0101
1101
000,...,999